Instruction Manual PMC-2
BA * PMC-2 * EN * 01/98 Page 13
2.5.5 I/Os and flags
Inputs can only be read.
System outputs can only be read.
Programmable outputs can be read and influenced.
Flags can be read and influenced.
2.5.6 Reset keys
With the BE-7 certain behaviour patterns of the PMC-2 can be selected for reset of the PMC-2.
During RESET the BE-7 key must be pressed down.
BE-7 key Function
ERROR QUIT load the default paramter set from ROM
CE after loading the parameter set, P0.26 ”COM1_Application” is changed to
SINEC_L1_S and P0.27 ”COM1_Address” to 1 in RAM.
ENTER prompt no ECL program
To Next Page
Loading...