PMC-2 Instruction Manual
Page 6 BA * PMC-2 * EN * 01/98
2 The PMC-2 in an overview
The PMC-2 digital positioning motor controller is the cost optimal and complete solution in future-
oriented technology for your positioning and synchro tasks.
2.1 Introduction
Until now a servo positioning has been realized by means of a positioning control and a separate
motor controller.
Now there is the PMC-2, where you will find these two components integrated in one single unit.
The advantages of this conception are as follows:
- no difficulties in adapting positioning control <-> motor controller
- deep system view until down to the motor current via system variables
- one software for positioning and synchro procedures
- one interface for setting parameters and programming of both components
- highly flexible process language
To Next Page
Loading...