ELAU PMC-2 - Variable and Parameter Menu

PMC-2 Instruction Manual
Page 12 BA * PMC-2 * EN * 01/98
2.5.4 Variable and parameter menu
After the input of a parameter (Pxxx), the BE-7 will ask you, if you want the modified parameter
record to be transferred to the PMC-2.
A transferred parameter record will only be accepted into the working memory with a positive edge
(LOW -> HIGH) on input "Enable".
All other inputs will be accepted right away.
If an arrow key is pressed longer than 1 second, the auto repeat function will be activated.