PMC-2 Instruction Manual
Page 74 BA * PMC-2 * EN * 01/98
9 Maintenance
Quick error recognition and eradication helps to reduce the related production stop to a minimum.
The diagnosis messages of the PMC-2, which can be read via EPAS-3 or the BE-7, enable well-
aimed and efficient error detection.
In case of any trouble, defective components can be exchanged without problem to ensure that the
trouble is cleared quickly and production can be resumed as soon as possible. This work must be
carried out by qualified maintenance staff only.
In case you return the defective unit to the ELAU customer support, please fill the distortion report
following this chapter.
CAUTION
Only units with identical hardware configuration and identical software
version may be exchanged
9.1 Spare parts, components
Stock keeping of spare parts:
To have the most important components on stock is an important prerequisite for the equipment to
function and be ready for use at all times.
When ordering spare parts, please give us the following data:
• Article number:
• Article designation:
• Serial number:
• Software version:
You will find this data on the type plate of the equipment or in the system variables of the PMC-2.
Example: type plate
Article number Article designation
13130182 PMC-2/10/08/000/00/00/00/00
234567/4
Serial number
Example: software versions in the system variables
S9.01 A_POS_Version 200300
S9.02 A_STELL_Version 200300
To Next Page
Loading...