Instruction Manual PMC-2
BA * PMC-2 * EN * 01/98 Page 25
4.3 Mounting
- Mount the units vertically with the power connections on the top side.
- Only connect one motor to each PMC-2.
WARNING HIGH VOLTAGE!
Disconnect from mains supply, before working
on this equipment. Electric discharge > 1min
Caution!
When exploiting the maximum brake power, the air outlet
temperature of the PMC-2 can become >100°C.
- Leave a mounting space of 100 mm on the top, the bottom and the front!
- A free air supply to the fan has to be guaranteed!
- External bleeders should have at least 100 mm distance to all adjacent parts, since they can warm
up very greatly; better is an installation outside the electric cabinet.
ACHTUNG hohe Temperatur
warning high temperature
Oberfläche des Gerätes im Betriebszustand
nicht berühren
do not touch to this surface
under operation conditions
To Next Page
Loading...