ELAU PMC-2 - Page 91

Instruction Manual PMC-2
BA * PMC-2 * EN * 01/98 Page 91
Index
A
Absolute value encoder module SSI-1........ 50
Access protection....................................... 66
Application range ......................................... 7
B
BE-7............................................................. 8
C
Chart with error reactions ........................... 65
Combinations PMC-2 and SB-motors......... 82
Commissioning .......................................... 56
Communication............................................ 8
Control voltage........................................... 34
D
DC-circuit................................................... 35
Definitions.................................................. 82
Declaration by the manufacturer ................ 86
Diagnosis and operation............................. 62
Direct parameter ........................................ 61
E
Earthing ..................................................... 32
Electromagnetic Tolerance......................... 30
I
Incremental encoder module INK-1............ 50
Incremental encoder simulation IKA-1........ 48
Installation notes........................................ 24
Interfaces................................................... 40
Interfaces of the additional cards................ 45
L
LEDs.......................................................... 62
List of all errors .......................................... 63
M
Mains contactor.......................................... 33
Maintenance .............................................. 74
Modifications.............................................. 90
Monitor outputs .......................................... 62
Motors........................................................ 19
Motor connector SB-056...205.................... 52
Mounting.................................................... 25
O
Overview ..................................................... 6
P
Parameter.................................................. 58
Performance features................................... 7
Product training............................................ 5
Programming ............................................. 18
S
Safety ........................................................ 20
System variables........................................ 67
T
T1-operation............................................... 34
Technical data............................................ 80
The control circuit....................................... 55
V
Variables.................................................... 66
Variables types........................................... 66
W
Wiring of the PMC-2 in the system............. 54
X
X1 and X2 power parts ............................... 41
X4 Inputs and outputs – positioning level.... 42
X5 Inputs and outputs – motor controller .... 43
X6 Resolver ............................................... 44
X7 COM1 and X8 COM2............................ 44
X12 encoder............................................... 46