It is the responsibility of the Manufacturer and the designers of the Machine on which you intends to install and use the Elca Radio
Remote Control to make sure that the structure, condition, organisation and the markings of the Machine as well as how it is
installed in its place of use are appropriate and allow the Machine to be used and controlled safely and reliably using the interface
of the Elca Radio Remote Control.
IT IS THE RESPONSIBILITY OF THE USER OF THE SYSTEM AND THEIR DESIGNERS that the installation, maintenance and use of
the Elca Radio Remote Control and all its components are carried out only and entirely in accordance with this Manual and in
compliance with all applicable Laws, Regulations and Standards, also local. It is also the responsibility of the Owner, the system
user and their designers to make sure that the structure, the condition, the organisation and the markings of the Machine and the
place where the Elca Radio Remote Control is installed and used are appropriate and allow the Machine to be used and controlled
safely and reliably using the interface of the Elca Radio Remote Control.
ONLY QUALIFIED AND SUITABLY TRAINED PERSONNEL ARE ALLOWED TO CONTROL AND USE THE ELCA RADIO REMOTE CONTROL
AND THE MACHINE CONTROLLED BY THE ELCA RADIO REMOTE CONTROL. ONLY QUALIFIED AND SUITABLY TRAINED PERSONNEL
ARE ALLOWED ACCESS TO THE VICINITY OF THE MACHINE CONTROLLED BY THE ELCA RADIO REMOTE CONTROL.
INADEQUATE INSTALLATION, OPERATION, MAINTENANCE AND ASSISTANCE OPERATIONS ON THE ELCA RADIO REMOTE CONTROL
CAN CAUSE SERIOUS PHYSICAL DAMAGE OR DEATH AND/OR DAMAGE TO PROPERTY. For further assistance refer to this Manual and
all its parts, or else contact Elca. Elca is not responsible for and accepts no liability for any installation of the Elca Radio Remote
Control carried out by Elca itself, or for any use or maintenance of the Elca Radio Remote Control that do not fully comply with all
the instructions and warnings supplied by Elca and with all applicable Laws, Regulations and Standards, also local.
Elca is not responsible for and accepts no liability for any alterations or modications of the Elca Radio Remote Control, or for the
use of non-original Elca parts that are used together or incorporated inside the Radio Remote Control itself.
IT IS THE RESPONSIBILITY OF THE OWNER, AND USER OF THE SYSTEM AND ITS DESIGNERS to make sure that the Elca Radio
Remote Control is always maintained and serviced in compliance with all the instructions and warnings provided by Elca, and in
compliance with all applicable Laws, Regulations and Standards, also local.
To Next Page
Loading...
