62
TO REPAIR MINOR SURFACE
CRACKS:
1. Rough sand and clean the damaged
area.
2. Apply gel coat.
3. Allow the gel coat to dry.
4. Sand the repaired area until it is
smooth to the touch.
5. Buff repaired area to a gloss finish.
For detailed repair instructions, refer to the
CCP Polycor®/Stypol® paint and gel coat repair
instructions.
TO REPAIR LARGER
SURFACE CRACKS:
1. Remove loose and broken fragments
from the damaged area. Use a grinder
or a power sander with medium grade
sandpaper to prepare a solid base for
body filler.
2. Apply filler as directed by the
manufacturer, smoothing it as you fill.
3. After the filler hardens, power sand
with a fine grade paper and repaint or
gel coat.
Wide cracks should be repaired by an
authorized body shop. Complete body panels
including front and rear caps are available for
purchase through your local Advantage Dealer.
When repairs are complete, it is
necessary to refinish the repaired area
to match the original finish. Consult
with your local Advantage Dealer for
appropriate finish instructions and
materials.
When refinishing is complete, use of a
rubbing compound will help blend the
repaired area with the existing finish.
09 EXTERIOR
ROOF FORMULATION:
TT-ADV Roof - WHT Generated Solid
Can...
Utech350mm
0.87 Pints
U350 Binder
245.5g
U455 Bright Yellow
0.1g
U160 Black
0.4g
U99 Reducer
55.6g
U100 White High Strength
161.7g
Total 463.3g
SIDE-WALL FORMULATION:
White YZ, Solid
FLNA41309
Utech350mm
0.80 Quarts
U350 Binder
450.6g
U564 Blue Shade Green
0.2g
U437 Yellow Oxide
1.6g
U160 Black
3.7g
U99 Reducer
102.0g
U100 White High Strength
292.1g
Total 850.2g
STANDARD FORMULATIONS
To Next Page
Loading...