- Incorrect choice:
Displayed by the message “Err”, when a function that is not compatible
with the chosen programme is selected.
The display duration is two seconds.
- Alarm code:
Alarm code indicates an error in the appliance operation. The
START/PAUSE sensor flashes when the code is displayed.
- Door closed:
It lights up when the safety device prevents the door opening and
switches off when it can be opened.
It flashes when the device is about to unlock the door (it should be
noted with PTC delaying devices, which need one or two minutes
to open).
- Time manager:
Represented by four segments positioned above the digits.
(See sect. 5.3 Time manager page 21
)
- Wash phase:
It lights up during the washing phase.
- Rinse phase:
It lights up during the rinse phase.
- Spin phase:
It lights up during the drainage phase before and during the final spin.
5.2.3.4 Buzzer
See sect. 4.2.3.4 Buzzer page 14
Technical Support - DMM 20/124 599 75 58-67 Rev.04
To Next Page
Loading...
