14.2.5 Buttons and LEDs
The function of each button is defined by the configuration of the appliance.
• Button no. 1: this button is related to LEDs (L1-L5).
pressing the button in sequence alters the temperature of the washing cycle
from 90°C to cold cycle.
• Button no. 2: this button is configurable and is related to LEDs (L6 and L7).
Depending on the configuration of the appliance, it can perform the function of:
super quick, easy-iron, super rinse, rinse hold, spin speed regulation.
• Button no. 3: this button is configurable and is related to LED (L8). Depending
on the configuration of the appliance, it can perform the function of:
super quick, easy-iron, super rinse, rinse hold.
• Button no. 4: this button is configurable and has the function of
START/PAUSE.
See sect. 3.3.3 Button 6 START/PAUSE on page 10
Technical Support - DMM 51/124 599 75 58-67 Rev.04
To Next Page
Loading...
