To Next PageTo Next Page
Need help?Do you have a question about the Electrolux EWX11831 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | EWX11831 |
| Category | Washer |
| Language | English |
Explains energy saving modes like Stand-Off and Auto-off for reduced electricity waste when idle.
Details the electronic control system components and general specifications for EWX13611.
Details the electronic control system components and general specifications for EWX11831.
Describes the control panel layout, including buttons, sensors, and LEDs for the P6 styling.
Illustrates and describes the display board and its assembly for the P6 styling.
Explains how washing programmes and touch sensors are configured for the appliance.
Details programme parameters and the function of sensors and LEDs on the control panel.
Describes the function of each button, sensor (Programmes, Temperature, Spin), and associated LEDs.
Explains the selection of spin speeds and available options like Rinse Hold and Easy Iron.
Details the functionality of the Start/Pause and Delayed Start sensors and their associated LEDs.
Describes indicator LEDs for options and the Padlock feature for child lock.
Explains Extra Rinse, Door Lock functions, and the appliance's buzzer system.
Details the electronic control system components and general specifications for EWX13611.
Details the electronic control system components and general specifications for EWX11831.
Describes the control panel layout, including buttons, sensors, and LEDs for the P3.0 styling.
Illustrates and describes the display board and its assembly for the P3.0 styling.
Explains control panel functions, including sensors and LEDs for P3.0 styling.
Details the function of the 'Finish In' sensor for programming cycle end time.
Explains information displayed, including programme time, errors, and alarm codes.
Provides steps to access and exit the appliance's diagnostic system for troubleshooting.
Details the sequence of component tests and their expected outcomes within the diagnostic cycle.
Describes how user-fixable alarms are displayed using LED combinations for P6 styling.
Describes how user-fixable alarms are displayed via LCD codes for P3.0 styling.
Explains how to read and interpret alarm codes and sequences for different appliance models.
Provides examples of how alarm codes are displayed via flashing LEDs for P6 and P3.0 models.
Explains how to quickly view the last alarm and how to delete stored alarms.
Details how to access and display the total operating time of the appliance.
Table showing compatibility between various washing options and programme phases.
Provides detailed explanations for each available washing option like Rinse Hold, Pre-wash, etc.
Details the construction components of washing machines with a universal motor.
Details the construction components of washing machines with a three-phase motor and Inverter.
Describes the detergent dispenser assembly and its operating principle.
Explains the design and usage of the detergent drawer for powder or liquid detergent.
Details the components that make up the washing unit, including tub, drum, and counterweights.
Describes the water circuit, including the OKO/IDB version drain circuit.
Details the components of the OKO/IDB version drain circuit, like pump and filter.
Explains the makeup of the electronic control system, including circuit boards and their functions.
Provides instructions for programming and updating the main circuit board.
Outlines electrical characteristics for universal and three-phase/inverter motor systems.
Describes the noise filter's function and provides details on the display board's electrical connections.
Details the general characteristics and electrical operation of the drainage pump.
Explains the general characteristics of the heating element, including thermal fuses.
Describes the NTC temperature probe used for controlling washing temperature.
Details the analogue pressure switch for water level control and its connection.
Explains the characteristics and operating principle of the Pull To Open door safety interlock.
Details the characteristics and operating principles of the universal motor.
Explains motor rotation direction and the function of the tachometric generator.
Describes how the universal motor receives power via the main circuit board and TRIAC.
Details the characteristics of the three-phase motor and the inverter system.
Explains the operation of the inverter in transforming single-phase to three-phase electricity.
Describes solenoid valve characteristics, operation, jamming, and low water pressure issues.
Shows the operating circuit diagram for EWX13611 models with a universal motor.
Provides a key linking appliance components to PCB components in the EWX13611 diagram.
Shows the operating circuit diagram for EWX11831 models with a three-phase motor.
Provides a key linking appliance components to PCB components in the EWX11831 diagram.
Details how to remove the worktop and access components from the top.
Instructions for accessing the solenoid valve and display board assembly.
Steps for accessing the control panel and removing the detergent dispenser.
Procedure for accessing and removing the analogue pressure switch.
Detailed steps for removing and reinstalling the detergent dispenser.
Instructions for accessing and removing the upper counterweight.
General guide to accessing components from the front of the appliance.
Procedures for accessing and replacing the door hinge and safety interlock.
Step-by-step guide for releasing and replacing the drum blade.
Instructions for safely removing the front panel of the appliance.
Details access to front panel components: counterweight, bellows seal, tub assembly.
Guidance on attaching and replacing tub suspension springs, including bushing details.
General guide to accessing components from the rear of the appliance.
Details access to back panel components: belt, pulley, motor, heating.
Instructions for replacing the belt, plastic pulley, motor, and heating element.
Steps for accessing the UIMC and removing the drainage pump.
Procedure for accessing and replacing the drain filter and IDB.
Detailed steps for accessing and removing the pressure chamber.
Guidance on accessing and replacing shock absorbers and their pins.
Instructions for accessing and removing the main drain pipe.
Details removing the worktop and accessing components from the top for inverter models.
Instructions for accessing solenoid valve and display board for inverter models.
Guide to accessing control panel, pressure switch, dispenser, counterweight for inverter models.
General guide to accessing front components for inverter models.
Details access to front panel components for inverter models.
General guide to accessing rear components for inverter models.
Details access to back panel components for inverter models.
Instructions for replacing belt, pulley, motor, and heating for inverter models.
Steps for accessing UIMC and drainage pump for inverter models.
Procedure for accessing and replacing the drain filter for inverter models.
Guide to accessing IDB, pressure chamber, and drain filter for inverter models.
Instructions for accessing shock absorbers and drain pipe for inverter models.
