SOI/DT 2006-01 dmm 29/71 599 37 47-13
4.6.1.1 Operating principle
Water fill to pre-wash compartment
(Pre-wash solenoid valve)
• This version is used in models with three or four compartments:
The detergent contained in compartment "a" is introduced at the
beginning of the pre-wash phase.
• In certain models featuring the "stains" option, compartment "a" may
be used (as an alternative) to contain the stain-removal product,
which is introduced during the wash phase.
Water fill to wash compartment
(Washing solenoid valve)
• In all models, compartment "b" is used to contain the detergent,
which is introduced at the beginning of the wash phase.
Water fill to conditioner compartment
(pre-wash and wash solenoid valves)
• In all models, compartment "d" is used to contain the conditioner,
which is introduced at the beginning of the final rinse.
Water fill to pre-wash and bleach compartment
(Pre-wash solenoid valve)
• In models with 4-compartment detergent dispensers, water is ducted
into compartments "a" and "c", though not at the same time.
• If the user selects the pre-wash option, water is ducted through
compartments "a" and "c" at the beginning of the pre-wash phase.
If this option has not been selected, water is ducted through the
compartments at the beginning of the first rinse.
Water fill to bleach compartment
(Bleach solenoid valve)
• In models with 4 compartments, water is ducted through
compartment "c" at the beginning of the first and in cotton cycles.
To Next Page
Loading...
