Electrolux LAUNDRY - Short Dispenser Operating Principle

SOI/DT 2006-01 dmm 31/71 599 37 47-13
4.6.2.1 Operating principle
Water fill to pre-wash compartment
(Pre-wash solenoid valve)
• This version is used in models with 3-compartment detergent
dispensers. The detergent contained in compartment "a" is
introduced at the beginning of the pre-wash phase.
• In certain models featuring the "stains" option, compartment
"a" may be used (as an alternative) to contain the stain-
removal product, which is introduced during the wash phase.
Water fill to wash compartment
(Washing solenoid valve)
• In all models, compartment "b" is used to contain the
detergent, which is introduced at the beginning of the wash
phase.
Water fill to conditioner compartment
(pre-wash and wash solenoid valves)
• In all models, compartment "d" is used to contain the
conditioner, which is introduced at the beginning of the final
rinse. The pre-wash and wash solenoid valves are actioned
simultaneously.
Water fill to pre-wash and bleach compartment
(Pre-wash solenoid valve)
• In models with 4-compartment detergent dispensers, water is
ducted into compartment "c" by a special solenoid valve at the
beginning of the first rinse.
Water fill to pre-wash and bleach compartment
(Pre-wash solenoid valve)
• In models with 4 compartments, water is ducted through
compartments "a" and "c", though not simultaneously.
• If the user selects the pre-wash option, water is ducted
through compartments "a" and "c" at the beginning of the pre-
wash phase.
a. If this option has not been selected, water is ducted through
the compartments at the beginning of the first rinse.