Electrolux LAUNDRY - Accessing Components from the Rear; Drive Belt Removal; Pulley Removal

SOI/DT 2006-01 dmm 64/71 599 37 47-13
6.3 Access from the rear panel
a. Remove the screws which secure the rear panel to the back side of
the cabinet.
From the rear panel it is possible to access to:
b. Belt
c. Pulley
d. Heater
e. Motor
f. Circulation pump (if featured)
g. Water control (if featured)
6.3.1 Drive belt
h. Take the belt, turn the pulley and remove it.
6.3.2 Pulley
i. Remove the belt.
j. Insert a catch to stop the pulley.
k. Remove the screw which secures the pulley to the drum shaft.
b
c
d
e
f /g
h
i j k