SOI/DT 2006-01 dmm 70/71 599 37 47-13
7 TOOLS AND MATERIALS
7.1 Standard tools
1. Set of standard flat-head screwdrivers (small,
medium, large).
2. Set of cross-head ("Phillips") screwdrivers.
3. Set of socket screws (7, 8, 10, 13, 15, 17mm).
4. Insulated scissors.
5. Allen keys (5-6 mm).
6. A battery-operated power screwdriver may also
be used.
7. “Torx” screwdriver (T20-T30-T50).
8. Adjustable wrench.
9. Cutting nippers (to tighten the clamps).
10. Standard pliers
11. Narrow-tipper pliers (curved).
12. Narrow-tipped pliers (straight).
13. Cutter.
To Next Page
Loading...
