MP500/4N-8-16 Installation
CONVENTIONS USED
For clarity, the manual applies the following conventions:
This symbol signals an important warning.
This symbol signals a recommendation.
This symbol indicates the compatibility with EN50131 grade 3 certification.
The overall certification of the system is equal to the minimum certification of the devices installed and the functions
enabled.
This symbol indicates the compatibility with EN50131 grade 2 certification.
The overall certification of the system is equal to the minimum certification of the devices installed and the functions
enabled.
This symbol indicates that the compatibility with the EN50131 certification may depend on other functions enabled in
the system.
This symbol indicates that the function or the device are not certified according to Standard EN50131.
This symbol indicates that the function or the device invalidate the EN50131 certification.
Alternating input voltage.
Power supply fitted with double insulator.
See the installation manual of the device.
To Next Page