Elkron MP500/8 - Page 16

16
MP500/4N-8-16 Installation
The table below illustrates the functions available according to the means of communications used.
Description of information
transmitted or received
Means of communications used
PSTN and
GSM
(vocal)
GSM
(SMS)
PSTN and
GSM
(DTMF
tones)
Web
Server:
PSTN
(modem)
ATS
(IDP, ADF,
C200B,
C200B P-P)
Sent by the control panel
Signalling of the intrusion/tamper alarm
■
■
■
■
■
Signalling of pre-alarm
■
■
Signalling of a technological event
■
■
■
■
■
Signal of panic/silent panic/emergency
response/hold-up
■
■
■
■
Signalling of arming/disarming of
system
■
■
■
■
Signalling of arming/disarming of
partition/s
■
■
■
■
Signalling of maintenance
■
■
Signalling of input isolation
■
■
Signalling of anomaly (black-out/
battery low/system breakdown)
■
■
■
■
Signalling of end of anomaly
■
■
Signally of a communications
breakdown
(1
)
■
■
Signalling of the end of a
communications breakdown
■
■
Signalling of the use of a false code
■
■
SIM expiration notice
■
■
■
Send images to various alarms
■
Interaction with
the control panel
System arming/disarming command
■
■
Command of arming/disarming of
partition/s
■
■
Video camera activation command
■
Controlled output activation command
■
■
Controlled output deactivation
command
■
■
Ambient listening arming command
■
Input isolation/inclusion command
■
■
Read event log command
■
System status request
■
■
Note
(1)
: Potential signalling is transmitted from the means of communication available not involved in the anomaly.