Chapter 3: Installation
3.1 Before You Begin
3.1.1 Site Requirements
You can guarantee the safe operation of the Bassoon by ensuring that it is installed in an
appropriate environment.
Feature Value
Ambient operating temperature 0 °C – 40 °C (32 °F – 104 °F)
Maximum operating altitude 10,000 m (30,000 ft)
Maximum relative humidity 90% non-condensing
Operating area atmosphere No flammable gases or vapors permitted in area
Models for extended environmental conditions are available.
The Bassoon dissipates its heat by natural convection. The maximum
operating ambient temperature of 0 °C – 40 °C (32 °F – 104 °F) must not be
exceeded.
3.1.2 Hardware Requirements
The components that you will need to install your Bassoon are:
Component Connector
Described
in Section Diagram
Main Power Cable
Power
Connector
3.5.2.2
Motor Cable
Power
Connector
3.5.2.2
Auxiliary Power Cable
J4
3.5.3
Bassoon Installation Guide
MAN-BASIG (Ver 1.4)
3-1
To Next Page
Loading...
