6
BASIC
OPERATIONS
Operating panel
Mark Function
①
To turn on / o the power
Power ON: Power LED lights up blue
Power OFF (standby status): Power LED lights up red
②
mode buttons
LED
To switch to the Camera mode.
The camera image will be displayed.
③ LED
To switch to the External input mode.
Images being input to the external input ports will be displayed.
④ LED
To switch to the Playback mode.
Images stored in an SD card/USB ash drive will be displayed.
⑤
To show/hide the menu on the screen.
P.20
⑥
To save a still image on an SD card/USB ash drive.
P.34
⑦
To rotate the image by 90 degrees.
⑧
To conrm the selected OSD menu item.
⑨
To pause the camera image.
⑩
To record the camera image as a video on an SD card/USB ash drive.
⑪
To darken the camera image.
⑫
To brighten the camera image.
• Press and hold this button for
more than 2 seconds
Power LED
①
②
⑦
⑤ ⑥
③
⑧
⑪ ⑫
④
⑨
P.19
P.19
P.19
P.23
P.20
P.19
P.35
P.17
P.17
To Next Page
Loading...
General