17
BASIC
OPERATIONS
Adjusting the brightness
Use the [ / ] buttons on the operating
panel or the [ / ] buttons on the remote
control to change the level of brightness of the
displayed image.
The brightness of the image will not change
automatically in response to the brightness of
the shooting environment.
7KHEULJKWQHVVRIWKHLPDJHLVGLIIHUHQW
• To reset the brightness setting to factory default setting, press the [ / ] buttons on the
operating panel at the same time.
• In places where the object is exposed to bright sunlight (e.g. near a window), or extremely
bright light, the brightness of the screen may not dim suciently, even if the [ ] button
on the operating panel or the [ ] button on the remote control is pressed.In such cases,
to adjust the amount of light, close the curtains or move the object away from the light.
To Next Page
Loading...
General