68
TROUBLE
SHOOTING
Symptom Possible cause/remedy
Some buttons on
the remote control
and operation panel
cannot be used
in the USB mode
(UVC)
• You cannot record the camera image, display a
thumbnail, display a still image of play the video while
displaying a UVC image.
Operation is
disabled during
calibration
• The image switches to the camera image when you
disconnect the wireless adapter. Start the calibration
again after the image switches to the camera image.
About the light (LED lighting)
・ The brightness of the light will diminish with long-term use. If its brightness
has signicantly diminished, consult the dealer from whom you purchased this
product or our nearest branch/oce for replacement.
About long-term usage of this product
・ Due to the lifetime of its parts, if the product is used for longer than the
warranty period, its performance and quality may deteriorate. In this case, we
will replace the parts for a charge. Consult the dealer from whom you purchased
the product or our nearest branch/oce.
About USB connection with xSyncBoard
・ Use the USB 2.0 terminal of xSyncBoard when connecting this unit and
xSyncBoard via USB.
UVC distribution cannot be used when connected to the USB3.0 terminal of
xSyncBoard.
The model numbers of xSyncBoard that support UVC of this unit are as follows.
・S55E1
・T65EC
・S65E1P
・S70E1
・S70E1P
・T75EB
To Next Page
Loading...