Elmo P30HD - Video Cable Connection and Power ON;OFF

15
English
BASIC
OPERATIONS
Connecting the video cable
Connect the document camera to the display device with a video cable corresponding to the display device.
CAUTION
Before connecting the main unit to other devices, be sure to turn OFF the power for all of the devices.
Set the resolution corresponding to the display device from the menu.

Turning the power ON/OFF
• Press the [ ] on the operating panel or the [ ]
button on the remote control to turn the power ON.
(After the [
] Button flashes blue, it is illuminated a few
seconds later.)
•
Pre
ss the [
] button on the operating panel or
the [
] button on the remote control to turn the power
OFF. You need to hold down the button for two seconds or
more for the button on the operating panel.
(The LED of the [
] button is illuminated in red.)
• Do not operate this device while it is flashing.
N o t e