Elmo P30HD - Page 89

81
English
ADVANCED
OPERATIONS
Operation Command Parameter Data Function
ROM Version QR
1
■■ To inquire about the ROM version.
2
3
4
ACK Check SA
0 (OFF)
■■ To switch the ACK check mode.
1 (ON)
CR Addition SC
0 (OFF)
■■ To switch the CR addition settings.
1 (ON)
*For “■■” in the data column, transmit the SPACE [20H] twice.
CAUTION
If the RS-232C cable is not connected correctly between the unit and a PC, no ACK is transmitted.
Connect an RS-232C cable correctly and fix it firmly with the connector set screws before starting the
operation.
Do not transmit any commands for 15 sec. after the power of the unit is ON.