39
English
VARIOUS
FUNCTIONS AND
OPERATIONS
Adjusting the brightness
Press the [BRIGHTNESS • ] and [BRIGHTNESS •
] buttons on the main unit to adjust image brightness.
Following two adjustment mode can be selected from the
OSD menu.
Note
• Factory setting is set to [Auto].
• Manual adjustment fixes the brightness and does not follow the change in
brightness of the object.
• When the brightness becomes dark, the frame rate slows, and the image may
become hard to see.
• By setting [Guide] to [On] in the OSD menu, the setting details is displayed on the
screen.
•
To go back to factory settings, press the [BRIGHTNESS • ] and [BRIGHTNESS •
] buttons on the main unit at the same time.
SELECT
Focus
Brightness
Mode
Pause
Image Rotation
Auto
Manual
MENU OK
SELECT
Focus
Brightness
Mode
Pause
Image Rotation
Auto
Manual
MENU OK
([Brightness] → [Manual] in the OSD)
Brightness of the image is fixed to the specified level.
Automatic brightness adjustment
([Brightness] → [Auto] in the OSD)
Brightness of the image changes automatically according to the
brightness of the object.
Manual brightness adjustmentt
To Next Page
Loading...
Need help?
General
