ELNA 9900 - Replacing the Jump Solenoid

elna 9900
19
Replacing the Thread Catcher Hook
To remove:
1. Remove the thread catcher unit (see page 18).
2. Loosen the 6 setscrews and remove the thread
catcher guide.
3. Remove the thread catcher hook screw.
Remove the thread catcher hook.
To attach:
4. Attach the thread catcher hook with the thread
catcher hook screw.
5. Attach the thread catcher guide with the 6
setscrews.
6. Attach the thread catcher unit (see page 18).
Setscrews
Thread catcher hook screw
Thread catcher hook
Thread catcher guide