ELTRA CS-2000 - Faults; Check Base Lines

Packaging, Transport and Installation
12
NOTICE
N3.0022
Electrical connection
Failure to heed the data on the type plate
 Electronic and mechanical components may be damaged.
• Only connect the device to a power supply system that is consistent
with the data on the type plate.
– Fluctuations of the mains supply voltage up to ± 10 %.
– The device must be operated in accordance with overvoltage category II and pollution
category 2, DIN EN 61010-1.
– Industrial environment in accordance with DIN EN 61010-1