: Auto loader
The CS-2000 can be supplied with an automatic sample loading system. This loading system
may also be retrofitted at a later date. Unlike many other auto loaders, the ELTRA system can
accommodate 130 samples giving hours of unattended operation. On request, the loader can
be delivered for more crucibles. The auto loader, which does not occupy any additional bench
space, is mounted above the area where the balance, PC and consumables are normally
placed. The crucibles positions on the loader are easily accessible to the operator even from
sitting position. The controlling of the auto loader, including sample weight storage and out of
sequence samples, are performed by the same PC controlling the CS-2000. The PC software
also includes all features needed. For installing the auto loader, the resistance furnace should
be positioned to the left of the analyzer.
For instructions on installing and operating the auto loader read the Loader manual which is
delivered with the loader.
To Next Page
Loading...
Need help?
General
