6.3.2 Reagent tube filling-Induction furnace
Scalding/burns
Hot furnace / combustion tube / analyzer parts
Parts of the analyzer can be very hot.
• Use heat protecting gloves.
Danger of bursting
Defective reagent tubes may cause injuries in the form of cuts and other
personal injuries.
• Before installing the new reagent tubes, check if they are damaged.
• Wear protective gloves and safety glasses when installing/removing
the reagent tubes.
Injuries in the form of cuts and other personal injuries
Danger from glass splitters
– Injuries in the form of cuts can be caused by damaged glasware and glass
splitters.
• Replace damaged glassware / reagent tubes
• Do not touch glass splitters with your hands.
Danger of toxication and personal injuries
Some chemicals may cause a fatal toxication or dangerous skin corrosion.
• Refer to the material safety data sheet of the used substances.
• Never eat or drink close to the chemical substances.
Risk of injury to eyes
Chemicals
When changing the chemicals, the smallest particles of chemicals may be
suspended in the air and cause damage to eyes.
• Always wear protective goggles when working with chemicals.
• Please heed the safety data sheets for the chemicals used.
To Next Page
Loading...
Need help?
General
