: Dust filter cartridge - inserting
1. Lift the dust filter cartridge (1) upwards.
2. Tilt its low end to the front and pull downwards.
3. Install a new cartridge by acting in reverse order.
Take care for the cartridge body to have the smaller diameter up and the bigger down.
6.6 O-rings replacement
Scalding/burns
Hot furnace / combustion tube / analyzer parts
Parts of the analyzer can be very hot.
• Use heat protecting gloves.
Injuries in the form of cuts and other personal injuries
Danger from glass splitters
– Injuries in the form of cuts can be caused by damaged sample flasks and
glass splitters.
• Replace damaged sample flasks
• Do not touch glass splitters with your hands.
High temperature / Burning of the skin
Hot combustion tube
To Next Page
Loading...
Need help?
General
