ELTRA CS-2000 Manual

Analysis
42
1. Lift and remove the glass platform (1) from the furnace inlet. Make sure that the two
hexagon socket screws (2) of the low carbon attachment are turned clockwise up to the
end. Use 4mm socket wrench.
2. Attach the device to the furnace inlet, so that the pins (3) and (4) fit into the furnace
inlet.
3. Loosen the two screws (2) until the front ring holds the device firmly in place.
4. The combustion boat (5) can now be moved in and out the furnace.

ELTRA CS-2000 Specifications

General

Brand	ELTRA
Model	CS-2000
Category	Measuring Instruments
Language	English