EMAK EF 95 Workshop Manual

Workshop manual
15
Fault
Possible cause
Rectification
Grass catcher does not
fill up
Grass in lawn too tall
 Mow in 2 passes
1
st
pass: Maximum cutting height
2
nd
pass: Desired cutting height
Fabric bag clogged – does not allow air to
pass
 Clean the fabric bag
Discharge channel / mowing implement soiled
- residues of last mowing process
 Clean discharge channel / mowing
implement
Level indicator does not
respond / responds
permanently
Mown grass stuck to fill level indicator lever
 Remove mown grass from fill level
indicator lever; ensure free lever
movement
1)
See the operating instructions from the engine manufacturer
2)
See the operating instructions from the transmission manufacturer
3.8.2 Fault display and fault elimination
Display
Fault
Fault description
Fault elimination
Err 01
Input seat contact
switch
Electronic system detects invalid
status of the seat contact switch
1 Switch the ignition off and back on
(position 2)
2 Sit down and stand up repeatedly
➯ Self-diagnosis; fault can clear
automatically
*
➯ Test / replace a) cable harness, b)
switch, electronic system
Err 02
Input brake
contact switch
Electronic system detects invalid
status of the brake contact switch
1 Switch the ignition off and back on
(position 2)
2 Press and release the brake pedal
several times
➯ Self-diagnosis; fault can clear
automatically
*
➯ Test / replace a) cable harness, b)
switch, electronic system
Err 03
Input mowing
implement switch
Electronic system detects invalid
status of the mowing implement
switch
1 Switch the ignition off and back on
(position 2)
2 Press the mowing implement switch
several times
➯ Self-diagnosis; fault can clear
automatically
*
➯ Test / replace a) cable harness, b)
switch, electronic system

EMAK EF 95 Specifications

General

Brand	EMAK
Model	EF 95
Category	Lawn Mower
Language	English