Workshop manual
6
2 General
2.1 Safety instructions
Working on the machine does not usually represent a specific hazard. An exception is the work that involves
mechanical components. These activities should be carried out with the caution and attention that is usual
for this type of work.
In addition to observing the usual accident-prevention regulations that are typical for all mechanical
workshops,we recommend:
Carry out maintenance, service and repair work only when the engine is switched off and cool.
Prior to starting work, remove the ignition key and disconnect the negative terminal of the battery.
Wear suitable protective gloves when you handle blades and sheet-metal parts.
Avoid petrol leaking. Wipe up leaked petrol.
Smoking prohibited in the vicinity of engine and tank.
Secure the tractor such that persons cannot be injured from inadvertent actions.
CAUTION!
Risk of accidents!
Observe the safety instructions in the operating and engine instructions, and the safety
instructions on the unit.
Trailer:
The total weight of a trailer pulled by the tractor should not be higher than 50% of the tractor
weight including driver. For this tractor, the total weight of the trailer should not be higher than
250 kg.
The maximum towed and drawbar load is 40 kg.
To Next Page
Loading...
Need help?
General
