Workshop manual
7
3 Maintenance and care
3.1 Maintenance table
Caution!
Risk of accidents!
Carry out maintenance, service and repair work only when the motor is switched off and cool.
Prior to starting work, remove the ignition key and disconnect the negative terminal of the
battery.
After the
first 5
operating
hours
Every
50 operating
hours
or yearly
Every
100
operating
hours
Checking the engine oil level
1)
Changing the engine oil
1)
Replacing the oil filter (if installed)
1).
Cleaning the air filter
1)
Replacing the air filter
1)
Checking the spark plug
1)
Checking the tyre pressure
Checking the mowing blade
Checking the adjustment of the
mowing implement
Checking the hydrostatic transmission
oil level
Cleaning the air intake grille on
the engine
Removing grass and mowing residues
from the gearbox
Cleaning the gearbox cooling fan
Lubricating as shown in the lubricating
plan
1)
See the operating instructions from
the engine manufacturer
With high stress and at high temperature reducing the
specified maintenance intervals may be necessary.