EMAK EF 95 - Replacing V-Belt Mowing Implement

Workshop manual
22
Balancing:
 Use a suitable measuring instrument to measure the
imbalance. Adjust until the difference between the two
blades is no more than 2 g.
4.3.3 Replacing V-Belt mowing implement – Mowing
implement 95 cm / 105 cm
 Disassemble the mowing implement.
 Detach the V-belt duct from the support at the mowing
implement..
 Release the 6 hexagon nuts of the mowing implement
cover.
 Remove the right V-belt cover from the mowing
implement.