EMAK EF 95 - Mowing Implement

Workshop manual
19
4.3 Mowing implement
4.3.1 Disassembling the mowing implement
The mowing implement must be removed when the is
used in winter service, and when the V-belt is replaced.
 Turn the steering wheel fully to the left.
 Remove the grass catcher.
 Remove the discharge channel.
 Unscrew the cheese-head screw on the channel
holder by 5-6 turns.
 Lower the mowing implement to the lowest setting.
 Unhook the tension spring on the mowing
implement.
 Set the mower implement back up to the top.