EMAK EF 95 Workshop Manual

Workshop manual
20
 Swing the locking plate of the V-belt duct forward
(1).
 Swing the front part of the V-belt duct down (2).
 Lower the mowing implement back down to the
lowest setting.
 Remove the V-belt from the pulley of the blade
brake clutch.
 Remove the 4 locking pins from the holding clips of
the mowing implement.
 Pull off the holding clips over the pins.
 Set the mower implement back up to the top.
 Pull out the mowing implement from the side.
Incorrect operation in winter service
Install the discharge channel when you use
the tractor in winter service.

EMAK EF 95 Specifications

General

Brand	EMAK
Model	EF 95
Category	Lawn Mower
Language	English