EMAK EF 95 Workshop Manual

Workshop manual
21
4.3.2 Replacing the blade
WARNING!
Risk of injuries - cutting
 Always wear protective gloves when you handle the blades.
 Wear protective goggles when you sharpen the blade.
 Unscrew the 17-mm hexagon head screw, and
remove it with serrated lock washer and washer.
 Pull off the blade with the blade retainer.
CAUTION!
 Balance a reground blade.
 Use only genuine spare blades for
replacement.
Assemble in the reverse sequence.
Tightening torque: 65 Nm
A blunt blade has a negative effect on the mowing performance and the appearance of the cut lawn. A poorly balanced
blade causes excessive vibrations during operation. A poorly balanced blade can damage the unit.
Sharpening:
 Always sharpen both edges of the blade with a
grinding disc of medium grade.
 Always sharpen at the bordered side so that only a
minimum of material is removed.
 A blade must be replaced when the wear of the blade
reaches 10 mm.

EMAK EF 95 Specifications

General

Brand	EMAK
Model	EF 95
Category	Lawn Mower
Language	English