Workshop manual
9
3.2.4 Tensioning pulley rocker / pivoting and bearing points
Tensioning pulley rocker (mowing implement):
Spray pivoting and bearing points with oil.
Pivoting and bearing points:
Spray all pivoting and bearing points and the
pivoting points of the ropes with oil.
3.3 Oil change
CAUTION!
See also operating instructions from the engine manufacturer.
Use an oil drain extension to change oil conveniently.
Have a suitable collecting container ready.
Remove the 19-mm screw plug. Hold the oil drain
extension with a fork spanner to prevent it from
being screwed out of the engine.
CAUTION!
Dispose of the used oil in accordance with
the legal regulations
Never drain used oil into the sewerage
system or the soil.
There are high fines on groundwater
pollution.
You can deliver used oil to any petrol station,
or get the address of a disposal company
from the local authorities.
Alternatively, you can suck off the oil through
the oil filler neck.
3.4 Air filter / spark plug
CAUTION!
See also operating instructions from the engine manufacturer.