EMAK EF 95 - Disassembling Tensioning Pulleys and Idler Pulleys

Workshop manual
34
4.5.3 Disassembling tensioning pulleys and idler pulleys
See disassembly / removing propulsion belt
Item
Designation:
a
Tensioning pulley (125)
b
Tensioning pulley (95 - 105)
c
Idler pulley
4.6 Electrical grass catcher emptying
Disassembling the linear cylinder
Disassembly requires the grass catcher to be removed.
 Remove the locking rings at the two fastening bolts (b).
 Remove the two fastening bolts (b), and remove the
linear cylinders (a).
The linear cylinder (a) is assembled in the reverse
sequence.