Workshop manual
23
Remove the left V-belt cover from the mowing
implement.
Unscrew the screw on the tensioning pulley slightly
until the V-belt can be removed.
Put down the V-belt.
Installing a new V-belt
Guidance and orientation of the V-belt differs
from type to type.
Refer to the information stickers on the mowing
implement.
Place the V-belt around the slightly loosened
tensioning pulley, and screw the pulley back on.
Arrange the V-belt around the rollers in the sequence
(2) / (3) / (4). Ensure that guidance and orientation of
the V-belt are correct.
To Next Page
Loading...
