EMC Connectrix B Series User Manual

104
EMC Connectrix B Series v6.2 ED-DCX-4S-B Hardware Reference Manual
Removal and Replacement Procedures (RRPs)
6 CORE BLADE 52 ENABLED
7 UNKNOWN VACANT
8 SW BLADE 51 ENABLED
switch:admin>
5. Determine the Fabric OS version by typing firmwareShow.
This example shows sample output for the firmwareShow
command:
switch:admin> firmwareShow
Local CP (Slot 4, CP1): Active
Primary partition: v6.2.0
Secondary Partition: v6.2.0
Remote CP (Slot 5, CP0): Standby
Primary partition: v6.2.0
Secondary Partition: v6.2.0
Note: If Local CP and Remote CP have different versions
of firmware, please retry firmwaredownload command.
switch:admin>
6. If the firmware version on the replacement blade does not match
that on the active CP blade, bring the replacement blade to the
same firmware level as the active blade.
7. Enter firmwareDownload -s to download the firmware to one of
the CP blades. Enter all requested information (use default
values):
switch:admin> firmwaredownload -s
Server Name or IP Address: 192.168.100.1
User Name: user
File Name: /software/v6.2.0
Password: ********
Do Auto-Commit after Reboot [Y]:
Reboot system after download [N]:
Firmwaredownload has started.
2008/07/03-14:59:21, [SULB-1001], 923,, WARNING, ED-DCX-4S-B, Firmwaredownload
command has started.
Start to install packages......
dir ##################################################
ldconfig ##################################################
glibc ##################################################
bash ##################################################
readline ##################################################
terminfo ##################################################
termcap ##################################################
setup ##################################################

EMC Connectrix B Series Specifications

General

Brand	EMC
Model	Connectrix B Series
Category	Switch
Language	English