EMC2 VNX Series Installation Guide

Table 10 IPv4 address for iSCSI targets (continued)
SP, slot and port Local port number Target port IP address Subnet mask Gateway
SPA, slot __, port 2
SPA, slot __, port 3
SPB, slot __, port 0
SPB, slot __, port 1
SPB, slot __, port 2
SPB, slot __, port 3
SPA, slot __, port 0
SPA, slot __, port 1
SPA, slot __, port 2
SPA, slot __, port 3
SPB, slot __, port 0
SPB, slot __, port 1
SPB, slot __, port 2
SPB, slot __, port 3
SPA, slot __, port 0
SPA, slot __, port 1
SPA, slot __, port 2
SPA, slot __, port 3
SPB, slot __, port 0
SPB, slot __, port 1
SPB, slot __, port 2
SPB, slot __, port 3
Note
VNX supports both dual-port and quad-port iSCSI I/O modules.
Table 11 IP address for each iSCSI NIC or HBA port (iSCSI initiator)
Server and Port Initiator IP Address Subnet Mask Default gateway
Planning Worksheets
VNX Block Configuration Worksheet 77

EMC2 VNX Series Specifications

General

Brand	EMC2
Model	VNX Series
Category	Storage
Language	English