EasyManuals Logo

Emerson Daniel 3410 Series User Manual

Emerson Daniel 3410 Series
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
3410 Series Gas Ultrasonic Meters Operations Manual Section 2: Setup meter communications
3-9000-777 Rev E January 2018
Setup HART® communications 11
2.3 Setup HART
®
communications
Daniel Ultrasonic Flow Meters are HART-capable devices utilizing the 4-20mA signal Analog
Output 1 on the CPU Module, in which the digital signal is sent from the field device (Daniel
Ultrasonic Flow Meter) to the host (PC running AMS
TM
Device Manager or a Field
Communicator). An external 24V power supply is required for the analog signal from the CPU
Module.
The HART Device Description application provides dynamic variables, device-specific
commands, universal commands and common practice commands in accordance with the
HART Communication Foundation. The Device Description defines the communication details
from the device to the host (e.g. menus for the Field Communicator, graphical displays for
AMS Device Manager and the device parameters - process variables, pressure, temperature,
diagnostics and three status alert groups - Failed, Maintenance and Advisory). Refer to the
Daniel 3410 Series Gas Ultrasonic Meters HART Field Device Specification (P/N 3-9000-761) for
details.
Also see, the HART Communications Foundation, AMS
Device Manager and 475/375 Field
Communicator websites:
http://www.hartcomm.org/protocol/about/aboutprotocol.html
http://www2.emersonprocess.com/en-US/brands/amssuite/Pages/AMSSuite.aspx
http://www2.emersonprocess.com/en-US/brands/fieldcommunicator/475FC/Pages/475Field-
Communicator.aspx
2.4 Setup the meter in a DeltaV System
Daniel 3410 Series Ultrasonic Flow Meters are compatible with DeltaV System communications.
The following are optional communications configurations of Daniel Ultrasonic Flow Meters:
Serial connection for RS-232 or RS-485
Ethernet
HAR
Modbus TCP/IP (requires a VIM card)
Refer to the Install Your Digital Automation System Manual for field wiring terminations, I/O
interface, power, and DeltaV control Network.
1. Access the DeltaV website hyperlink shown below.
2. Click
Books Online under Quick Links.
3. Setup your user account and access the manual.
http://www2.emersonprocess.com/en-US/brands/DeltaV/Pages/index.aspx

Table of Contents

Other manuals for Emerson Daniel 3410 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Emerson Daniel 3410 Series and is the answer not in the manual?

Emerson Daniel 3410 Series Specifications

General IconGeneral
BrandEmerson
ModelDaniel 3410 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals