Emerson Daniel 3410 Series - Determining Meter Power-Up and Power-Down Times; Table 6-23 Audit Log Tracking Group Monitored Data Points

110 Determining meter power-up and power-down times
Section 6: Archive logs 3410 Series Gas Ultrasonic Meters Operations Manual
January 2018 3-9000-777 Rev E
6.1.4 Determining meter power-up and power-down times
The audit log can be used to determine the meter start (or re-start) time and the meter power-
down time by examining the
PowerFailTime record(s). The PowerFailTime record time stamp
indicates (to within a few seconds) the time that the meter was started. The As-left value
indicates the time (to within a few seconds) that the meter was powered-down.
Table 6-23 Audit log tracking group monitored data points
Tracking data group Data point
ResetTrkParam
Ta mp
Ta mp H i
Ta mp Lo
Ta mp Se n
Ta mp Wt
Ts pe
Ts pe Hi
Ts pe Lm t
Ts pe Lo
Ts pe Se n
Ts pe Wt
Ts pf
Ts pf Hi
Ts pf Lo
Ts pf Mat ch
Ts pf Se n
Ts pf Wt