Emerson PACMotion VFD Series - Parameter Adjustment Methods

44 PACMotion VFD AC Variable Speed Drive User Guide GFK-3111A
Setting a Parameter to the Minimum Value
TFT and OLED Display :
Maximum frequency/Speed limit Maximum frequency/Speed limit
1500 rpm 0 rpm
P1-01  7500 rpm 0 rpm P1-01  7500 rpm 0 rpm
Whilst editing a
parameter value, press
the Up and Down keys
simultaneously.
The parameter will be set
to the lowest possible
value.
Adjusting Individual Digits
When editing parameter values and making large changes, e.g. setting the motor rated speed from
0 to 1500 RPM, it is possible to directly select the parameter digits using the following method.
TFT and OLED Display :
Extended menu access Extended menu access Extended menu access Extended menu access Extended menu access Extended menu access
0 _0 _0 100 100 100
P1-14 30 000 0 P1-14 30 000 0 P1-14 30 000 0 P1-14 30 000 0 P1-14 30 000 0 P1-14 30 000 0
Whilst editing a
parameter value,
press the Stop
and Navigate keys
simultaneously.
The cursor will
step one digit
to the left.
Repeating the key
press will move
another digit to
the left.
The individual
digit value may
be adjusted using
the up and down
keys.
Adjust the value
using the Up and
Down keys.
When the
cursor reaches
the highest
accessible digit,
pressing Stop
and Navigate will
return the cursor
to the right most
digit.
Press the
Navigate key
to return to
the parameter
selection menu.