74 PACMotion VFD AC Variable Speed Drive User Guide GFK-3111A
Parameter Group 0 – Monitoring Parameters (Read Only)
Table 44: Parameter Group 0 – Monitoring Parameters (Read Only)
Par. Function Units
P0-01 Analog Input 1 value %
P0-02 Analog Input 2 value %
P0-03 Digital Input status N/A
P0-04 Speed controller reference Hz / RPM
P0-05 Torque controller reference %
P0-06 Digital speed reference Hz / RPM
P0-07 Fieldbus speed reference Hz / RPM
P0-08 PID reference %
P0-09 PID feedback %
P0-10 PID output %
P0-11 Motor voltage V
P0-12 Output torque %
P0-13 Trip log N/A
P0-14 Magnetising current (id) A
P0-15 Rotor current (iq) A
P0-16 DC bus voltage ripple V
P0-17 Motor stator resistance Rs Ω
P0-18 Motor stator inductance Lsd H
P0-19 Motor rotor resistance Ω
P0-20 DC bus voltage V
P0-21 Heatsink temperature °C
P0-22 Remaining time to next service Hours
P0-23 Time heatsink temperature >85°C HH:MM:SS
P0-24 Time internal temperature > 80°C HH:MM:SS
P0-25 Estimated rotor speed Hz / RPM
P0-26 kWh meter kWh
P0-27 MWh meter MWh
P0-28 Software version N/A
P0-29 Drive type N/A
P0-30 Serial number N/A
P0-31 Total operating time HH:MM:SS
P0-32 Run time since last trip 1 HH:MM:SS
P0-33 Runtime since last trip 2 HH:MM:SS
P0-34 Run time since last enable HH:MM:SS
P0-35 Cooling fan operating lifetime Hours
P0-36 DC bus voltage log V
P0-37 DC bus voltage ripple log V
P0-38 Heatsink temperature log °C
P0-39 Internal temperature log °C
P0-40 Motor current log A
P0-41 Over current trip count N/A
P0-42 Over voltage trip count N/A
P0-43 Under voltage trip count N/A
P0-44 Heatsink over temp.trip count N/A
P0-45 Brake over current trip count N/A
P0-46 Internal over temp. trip count N/A
P0-47 Control PCB comms. fault count N/A
P0-48 Power PCB comms. fault count N/A
P0-49 Modbus RTU comms. fault count N/A
P0-50 CANbus comms. fault count N/A
P0-51 PDI registers N/A
P0-52 PDO registers N/A
To Next Page
Loading...
