Rosemount Model 1195/ProPlate/Mass ProPlate
6-22
a. Enter Primary Element minimum diameter. This is the bore
size. See Figure 6-15.
b. Enter Primary Element Material.
c. Enter Meter Tube Diameter (pipe ID) and units at
reference temperature. This is dimension B.D. in Figure 6-15.
d. Enter Meter Tube Material.
6. Enter Operating Temperature Range and Units.
7. (Optional) If desired, modify standard temperature conditions.
8. Select Next.
9. If you selected your own fluid name, fill in the density column and
the viscosity column.
If you used an AIChE database fluid, this table is already
populated with AIChE data. However, if a change is made to either
a density or viscosity value, the EA considers the fluid to be
“Custom Fluid.”
10. Select Flow Units.
11. Select Finished.
Figure 6-16. Compressibility and
Viscosity Table (Liquid Configuration).
NOTE
Table values automatically
convert if a different unit of
measure is selected.
To Next Page
Loading...
