61
Reference Manual
00809-0100-4772, Rev FA
Transducer Block
March 2016
Transducer Block
Wetted material
Wetted Material is a factory set configuration that reflects the construction of your
flowmeter:
316 SST
Nickel Alloy-C
Carbon Steel
Super Duplex
Flange type
Flange Type enables you to specify the type of flange on the flowmeter for later reference.
This variable is preset at the factory but can be changed if necessary.
Wafer ASME 150
ASME 150 Reducer ASME 300
ASME 300 Reducer ASME 600
ASME 600 Reducer ASME 900
ASME 900 Reducer ASME 1500
ASME 1500 Reducer ASME 2500
ASME 2500 Reducer PN10
PN10 Reducer PN16
PN16 Reducer PN25
PN25 Reducer PN40
PN40 Reducer PN64
PN64 Reducer PN100
PN100 Reducer PN160
PN160 Reducer PN250
PN250 Reducer JIS 10K
JIS 10K Reducer JIS 16K/20K
JIS 16K/20K Reducer JIS 40K
JIS 40K Reducer Special
To Next Page
Loading...
