Name: Encore ENPS-2012
Brand: Encore
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Configuration from Embedded Web Server

Use Bindery Mode: Enable or Disable.

Name of the File Server.

Current Status: Connect or Disconnect.

TCP/IP Status

1. Click Status, it then appears the sub-menu.

2. Click TCP/IP, it then as shown in the following picture.

Use DHCP/BOOTP: This option allows you to view DHCP/

BOOTP status. If there is a

DHCP/BOOTP server on your network,

this option allows the print server to

5 - 7

Other manuals for Encore ENPS-2012

Questions and Answers:

Need help?

Do you have a question about the Encore ENPS-2012 and is the answer not in the manual?

Ports & interfaces

USB ports	2 x USB 2.0
Parallel port	1 Bi-direction parallel port (IEEE 1284)
Network port	RJ-45 for 10Base-T or 100Base-TX