Configuration from Embedded Web Server
obtain IP-related settings automatically
from your DHCP server.
IP Address: This option allows you to view IP address
from the print server. The IP address must
meet the IP addressing requirements of the
network segment.
Subnet Mask: This option allows you to view subnet mask
from the print server. The IP address must
meet the IP addressing requirements of
the network segment.
Gateway: This option allows you to view gateway from the
print server. This IP address of gateway must
meet the router or gateway to go across of the
network segment.
SNMP Status
1. Click Status, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
5 - 8